V.A.P11G WiFi Bridge IEEE 802.11b/g User Manual

1. Support any VoIP ATAs and VoIP Phones;
     2. Support Wifi model: AP Client;
     3. IEEE 802.11B/G compliant;
     4. Support WEP (64 bit), WEP (128 bit),
        WPA, WPA2 Security access;
     5. Support SSID Broadcast.
     6. Frequency: 2.4Ghz

____________________________________________________________
Shenzhen Fu Zhe Electronics Co., Ltd.
Mr Lee
Msn:    szfzdz@msn.com
Email:      szfzdz@gmail.com
tel:86-755-82959910
fax:86-755-82959901
www.diytradeVOIP.com

With this portable device, VoIP Phone Adapters, IP Phones and other IT products with Ethernet RJ45 port can access wireless network easily. Two kinds of application topology of VAP11G are shown as below.

Specification:

1 10/100 base Ethernet cable header;
1 DC-2.0 female power port for power in;
1 DC-2.0 male power port for power out;
Input Voltage: DC5V-15V;
Power Consumption: Less than 1.5W;
Transmission Distance Indoor: 30m

VAP11G provides users a combination of Ethernet network and power cable, VAP11G uses the original power supply of VoIP phone adapter or some other IT products’ power supply which has DC 2.0 power jack (5-15V, 1.5W). One power supply can power VAP11G, as well as the VoIP phone adapter.

Please use power supply with the polarity as shown below. Power supply with different polarity will damage VAP11G and the devices which the power supply belongs to. Vonets will NOT be responsible for the loss caused by using the incorrect power supply. (Both Power Jack and Power Port are compliable with this polarity)
Alternatively, Vonets can also provide power supply for VAP11G(Optional).

WPA
WPA automatically uses TKIP with dynamic encryption keys. Enter a passphrase on this screen. Encryption - TKIP is automatically selected as the encryption method. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be. Click Next to proceed, or click Back to return to the previous screen.

WPA2
WPA2 automatically uses AES with dynamic encryption keys (AES is a stronger encryption method than TKIP). Enter a passphrase on this screen. Encryption - AES is automatically selected as the encryption method. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.

Get pdf VAP11G WiFi Bridge IEEE 802.11b/g User Manual