The EP-8201 is a quality phone with lots of features for both business and residential users. Its slim and upright design makes it an ideal desktop phone. The phone is based on ITU-H.323 V4 and IETF SIP V2 open standards. The two protocols approach makes the phone to be compatible to most VoIP systems in deployment today.
The Phone is designed for the ease of installation and setup. The PoE option simplify the installation in a PoE LAN environment. In addition, the second Ethernet Port allows the existing PC to be connected to the phone directly without addition an additional Ethernet Hub or Switch. Various configuration modes allow the user / system administrator to configure the phone automatically or quickly. .


The EP-8201 VoIP Phone has the following features:

     ·    Supports SIP 2.0

    ·    Supports TCP/UDP/IP, RTP, HTTP, HTTPS, ARP, DNS, DHCP, NTP/SNTP, FTP, TFTP, and SSL protocols

    ·     Interoperable with various 3rd party VoIP end user devices, Proxy/Registrar/Server, and gateway products

    ·     Supports popular vocoders including G.711 a-law and u-law, GSM, G.723.1, G.729a/b/ab

    ·     Supports standard voice features such as Caller ID Display or Block, Call Waiting, Call Hold, Call Transfer, Call Forward,         in-band and out-of-band DTMF (RFC2833/SIP INFO), and Dial Plans

    ·    Supports conferencing, hands-free loudspeaker, phonebook, last number redial, call log, volume control, and voicemail         message indicator

    ·    Supports BASIC and DIGEST authentication (MD5, MD5-sess)

    ·    Provides easy configuration through automatic configuration, Web browser-based Graphical User Interface (GUI), or, if         desired, manual operation (phone keypad interface)

    ·    Supports NTP and redundant DNS servers

    ·     NAT-friendly remote upgrade capability (via HTTP) even from behind firewall/NAT router.

Shipping Contents

Table 1 below shows what comes packed with the EP-8201 VoIP  Phone.

               Items Shipped with the EP-8201

Installation and Basic Configuration

Hardware Installation

• 1.    Connect the handset and telephone cord to the base of the VoIP Phone.
• 2.    Use the enclosed Ethernet cable to connect the LAN port to a hub or switch, or to a DSL Router or Cable
          Modem.
• 3.    Connect the power supply using the enclosed AC power supply.
• 4.    For the first time installation, the phone will scan the network for available services which are DHCP, PPPoE,
         and Fixed IP.Select the preferred service and enter the required information if needed.No user input is
        required for DHCP service.User ID and Password are required for PPPoE.IP address, Netmask, and Gateway
         IP Addressare required for Fixed IP mode.